Saltar al contenido principal

iPad Pro Wärmeleitpaste tauschen

Inglés
Alemán
Paso 5
iPad Pro Thermal Paste Replacement, Install the logic board shield: paso 0, imagen 1 de 3 iPad Pro Thermal Paste Replacement, Install the logic board shield: paso 0, imagen 2 de 3 iPad Pro Thermal Paste Replacement, Install the logic board shield: paso 0, imagen 3 de 3
Install the logic board shield
  • Be very careful during this step! The Tesa tape is very sticky, and the shield can't be repositioned once it sticks.

  • Use tweezers or your fingers to remove the protective paper lining from the Tesa tape.

  • Align the shield over the logic board in the correct orientation.

  • Lay the shield over the logic board.

Sei bei diesem Schritt besonders vorsichtig! Das Tesa-Klebeband ist sehr klebrig, und die Abschirmung lässt sich nicht mehr verschieben, wenn sie einmal festgeklebt ist.

Benutze eine Pinzette oder deine Finger, um die Papierschutzabdeckung vom Tesa-Klebeband abzuziehen.

Richte die Abschirmung korrekt über dem Logic Board aus.

Lege die Abschirmung über das Logic Board.

[title] Install the logic board shield
[* icon_caution] Be very careful during this step! The Tesa tape is very sticky, and the shield can't be repositioned once it sticks.
-[* black] Use tweezers or your fingers to remove the protective paper lining from the Tesa tape.
+[* black] Use [product|IF145-020|tweezers] or your fingers to remove the protective paper lining from the Tesa tape.
[* black] Align the shield over the logic board in the correct orientation.
[* black] Lay the shield over the logic board.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.