Saltar al contenido principal

Reemplazo de batería del iPad Pro 11" 2.ª generación

Inglés
Español

Traduciendo paso 9

Paso 9
iPad Pro 11" 2nd Gen Battery Replacement, Remove the battery: paso 0, imagen 1 de 2 iPad Pro 11" 2nd Gen Battery Replacement, Remove the battery: paso 0, imagen 2 de 2
Remove the battery
  • Lift both halves of the battery out of the iPad at the same time.

  • Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.

  • Remove the old battery adhesive from the frame using tweezers and high-strength (>90%) isopropyl alcohol with a lint-free cloth where needed.

  • If your battery doesn't come with preinstalled adhesive, use Tesa tape to reattach the battery to the rear case.

Levanta ambas mitades de la batería del iPad al mismo tiempo.

No reutilices la batería después de haberla quitado, ya que hacerlo supone un riesgo potencial para la seguridad. Reemplázala con una batería nueva.

Retira el adhesivo de batería viejo del marco con unas pinzas y alcohol isopropílico de alta resistencia (>90 %) con un paño sin pelusa cuando sea necesario.

Si tu batería no viene con adhesivo preinstalado, usa cinta Tesa para volver a colocar la batería en la carcasa trasera.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.