Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 5
-
Tilt the battery out of the device to separate the rest of the adhesive.
-
Remove the battery.
-
Apply pre-cut adhesive adhesive or double-sided tape to the battery well at the places where the old adhesive was located, not directly onto the battery.
-
Temporarily reconnect the battery to the motherboard to help align it correctly. Disconnect the battery after it's seated.
-
Make sure that the battery sits in the center of the battery well and there's an even gap around the battery.
-
Press the new battery firmly into place.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.