Saltar al contenido principal

オープニング手順

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 16 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 27

Paso 27
Opening Procedure: paso 0, imagen 1 de 2 Opening Procedure: paso 0, imagen 2 de 2
  • Once all of the adhesive has been separated, open the digitizer like a book and rest it parallel to the iPad.

  • During reassembly, clean the remaining adhesive from the frame—and the digitizer if you're re-using it—with isopropyl alcohol. Replace the adhesive with our adhesive strips or pre-cut adhesive cards.

  • Be mindful of the display cables when reassembling the device. Make sure they are folded properly underneath the LCD screen to prevent any damage.

接着剤がすべて分離したら、デジタイザーを本のように開き、iPadと平行になるように置いてください。

再組み立ての際、フレームやデジタイザーを再利用する場合は、フレームに残った接着剤をイソプロピルアルコールで拭き取ります。接着剤は、接着剤ストリップまたはプレカットされた接着剤カードと交換してください。

本デバイスを組み立てる際には、ディスプレイケーブルに注意してください。液晶画面の下にきちんと折りたたまれていることを確認し、破損を防いでください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.