iPad 7 LCD Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Volver a la Guía

Inglés

Chino

Paso anterior Siguiente paso

Traduciendo paso 5

Paso 5

iPad 7 LCD Replacement, Disconnect the battery: paso 0, imagen 1 de 3

iPad 7 LCD Replacement, Disconnect the battery: paso 0, imagen 2 de 3

iPad 7 LCD Replacement, Disconnect the battery: paso 0, imagen 3 de 3

Disconnect the battery

Be careful when you isolate the battery using a battery blocker. The battery contacts are easily bent or broken, resulting in irreversible damage.
Ensure that the iFixit logo on the battery blocker is facing up.
Slide the battery blocker underneath the logic board's battery connector at a 35 degree angle.
Don't push the battery blocker underneath the connector with excessive force. If you're having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery instead.
The battery blocker or playing card ideally should slide under the logic board without encountering any blockages. After insertion, it should rest at about a 15 degree angle.
Leave the battery blocker in place as you work.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.