Saltar al contenido principal

iPad 7 Vervanging van de LCD

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Holandés
Paso 3
iPad 7 LCD Replacement, Disconnect the battery: paso 0, imagen 1 de 2 iPad 7 LCD Replacement, Disconnect the battery: paso 0, imagen 2 de 2
Disconnect the battery
  • Use a Phillips screwdriver to remove the 2.3 mm-long screw securing the battery connector to the logic board.

Gebruik een kruiskopschroevendraaier om de 2.3 mm lange schroef, waarmee de batterijaansluiting op het logic board is bevestigd, te verwijderen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.