Saltar al contenido principal

Reemplazo del panel frontal del iPad Air Wi-Fi

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 76 guías que incluyen este paso.

Inglés
Español
Paso 13
iPad Air Wi-Fi Front Panel Replacement: paso 0, imagen 1 de 1
  • Reheat the iOpener and place it on the top edge of the iPad, over the front-facing camera.

  • Be careful not to overheat the iOpener during the repair procedure. Wait at least ten minutes before reheating the iOpener.

  • If you have a flexible iOpener, you can bend it to heat both the upper left corner and the upper edge at the same time.

Vuelve a calentar el iOpener y colóquelo en el borde superior del iPad, sobre la cámara frontal.

Ten cuidado de no sobrecalentar el iOpener durante el procedimiento de reparación. Espera al menos diez minutos antes de recalentar el iOpener.

Si tienes un iOpener flexible, puedes doblarlo para calentar la esquina superior izquierda y el borde superior al mismo tiempo.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.