How to open the Huawei Watch GT 3 (46mm) for Repairs

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Volver a la Guía

Inglés

Holandés

Paso anterior Siguiente paso

Traduciendo paso 3

Paso 3

How to open the Huawei Watch GT 3 (46mm) for Repairs, Pry up the rear panel: paso 0, imagen 1 de 2

How to open the Huawei Watch GT 3 (46mm) for Repairs, Pry up the rear panel: paso 0, imagen 2 de 2

Pry up the rear panel

Insert the edge of a spudger into the the loudspeaker opening at the bottom edge of your watch.
When prying up the back cover put a finger on top or the edge of it and hold it down. Too much force during the prying procedure may lead to popping off the back cover too quickly and tearing the rear panel assembly cable.
The plastic clamps holding the back cover in place sit very tight and may require some force during the prying procedure.
Use a spudger to pry up the rear panel of your Huawei watch GT 3.
Don't try to remove the back cover assembly all the way yet, it's still connected to the daughterboard.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.