Saltar al contenido principal

Xbox Series X Netzteil ersetzen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Alemán
Paso 2
Xbox Series X Power Supply Replacement, Remove the 2-pin power cable: paso 0, imagen 1 de 3 Xbox Series X Power Supply Replacement, Remove the 2-pin power cable: paso 0, imagen 2 de 3 Xbox Series X Power Supply Replacement, Remove the 2-pin power cable: paso 0, imagen 3 de 3
Remove the 2-pin power cable
  • Grip and compress the locking tab on the 2-pin power connector.

  • While compressing the locking tab, lift the connector straight up to disconnect it from the board.

Greife und drücke die Halteklammer am 2-Pin-Stromkabel zusammen.

Halte die Klammer gedrückt und ziehe den Anschluss gerade nach oben, um ihn vom Board zu lösen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.