Saltar al contenido principal

Xbox Series X Netzteil ersetzen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Alemán

Traduciendo paso 1

Paso 1
Xbox Series X Power Supply Replacement, Remove the 10-pin power cable: paso 0, imagen 1 de 3 Xbox Series X Power Supply Replacement, Remove the 10-pin power cable: paso 0, imagen 2 de 3 Xbox Series X Power Supply Replacement, Remove the 10-pin power cable: paso 0, imagen 3 de 3
Remove the 10-pin power cable
  • Grip and compress the locking tab on the 10-pin power connector.

  • While compressing the locking tab, lift the connector straight up to disconnect it from the board.

  • Always pull cables by their connectors and not the wires themselves.

Greife und drücke die Halteklammer am 10-Pin-Stromkabel zusammen.

Halte die Klammer gedrückt und ziehe den Anschluss gerade nach oben, um ihn vom Board zu lösen.

Ziehe nie direkt am Kabel, immer nur am Anschluss.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.