Saltar al contenido principal

Xbox Series X 中央筐体アセンブリ

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 6

Paso 6
Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: paso 0, imagen 1 de 3 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: paso 0, imagen 2 de 3 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: paso 0, imagen 3 de 3
Remove the center chassis assembly
  • The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.

  • Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.

  • Lift out the center chassis assembly to remove it from the shell.

  • During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

中央の筐体は、ガイドペグで本体と位置合わせがされています。筐体を持ち上げるには、このペグをスロットからスライドさせる必要があります。

中央の筐体を握って、シェル上部の緑色のファングリルの方に引き、シェルからガイドペグを外します。

中央の筐体アセンブリを持ち上げて、本体から取り出します。

再組み立ての際、中央の筐体を本体内に装着する時に、リボンケーブルが挟まれないように注意してください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.