Saltar al contenido principal

Sostituzione gruppo struttura centrale Xbox Series X

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Italiano
Paso 2
Xbox Series X Center Chassis Assembly Replacement: paso 0, imagen 1 de 2 Xbox Series X Center Chassis Assembly Replacement: paso 0, imagen 2 de 2
  • Use a pair of tweezers to pull up on the black plastic pull tab to disconnect the USB port cable.

  • Pull only on the pull tab, not the cable itself.

  • If the USB port cable feels adhered to the metal chassis, use an apply an iOpener or hair dryer to heat the cable. Depending on your model of Xbox, you may also need to slide an opening pick under the cable to separate the adhesive.

Usa un paio di pinzette per tirare l'aletta in plastica nera per scollegare il cavo della Porta USB.

Tira solo l'aletta, non il cavo stesso.

Se senti il cavo della porta USB incollato alla scocca di metallo, usa un iOpener o scaldalo attentamente con un asciugacapelli per ammorbidire l'adesivo.

[* black] Use a pair of tweezers to pull up on the black plastic pull tab to disconnect the USB port cable.
[* icon_caution] Pull only on the pull tab, not the cable itself.
- [* icon_note] If the USB port cable feels adhered to the metal chassis, [guide|11677|apply an iOpener|new_window=true] or carefully heat it with a hair dryer to soften the adhesive.
+ [* icon_note] If the USB port cable feels adhered to the metal chassis, use an [guide|11677|apply an iOpener|new_window=true] or [guide|157348|hair dryer|new_window=true] to heat the cable. Depending on your model of Xbox, you may also need to slide an opening pick under the cable to separate the adhesive.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.