Saltar al contenido principal

Xbox Series X 中心机箱组件更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Chino

Traduciendo paso 1

Paso 1
Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 1 de 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 2 de 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 3 de 3
Disconnect the USB port cable
  • The ribbon cables and their connectors are extremely fragile, so always open locking tabs gently and pull cables slowly.

  • Use the flat end of a spudger to flip open the metal locking tab on the USB port ribbon cable.

  • During reassembly, gently snap the metal locking tab back into place once the cable has been inserted.

带状电缆及其接口非常脆弱,因此请始终轻轻打开锁定片并缓慢拉动电缆。

使用撬棒的平端翻转打开 USB 端口带状电缆上的金属锁定片。

在重新组装过程中,插入电缆后,轻轻地将金属锁定片卡回原位。

[title] Disconnect the USB port cable
-[* icon_note] The ribbon cables and their connectors are extremely fragile, so always open locking tabs gently and pull cables slowly.
+[* icon_caution] The ribbon cables and their connectors are extremely fragile, so always open locking tabs gently and pull cables slowly.
[* black] Use the flat end of a spudger to flip open the metal locking tab on the USB port ribbon cable.
[* icon_reminder] During reassembly, gently snap the metal locking tab back into place once the cable has been inserted.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.