Saltar al contenido principal

Xbox Series X 中央筐体アセンブリ

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 1

Paso 1
Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 1 de 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 2 de 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 3 de 3
Disconnect the USB port cable
  • The ribbon cables and their connectors are extremely fragile, so always open locking tabs gently and pull cables slowly.

  • Use the flat end of a spudger to flip open the metal locking tab on the USB port ribbon cable.

  • During reassembly, gently snap the metal locking tab back into place once the cable has been inserted.

リボンケーブルとコネクタは大変デリケートです。そのため、必ずロックタブを静かに開いて、ケーブルをゆっくりと引いてください。

スパッジャーの平面側先端を使って、USBポートリボンケーブル上のメタル製ロッキングタブを跳ね上げます。

再組み立ての際には、ケーブルを装着した後、金属製のロックタブをゆっくりと元の位置に戻してください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.