Saltar al contenido principal

Xbox Series X zentrales Chassis ersetzen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Alemán

Traduciendo paso 1

Paso 1
Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 1 de 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 2 de 3 Xbox Series X Center Chassis Assembly Replacement, Disconnect the USB port cable: paso 0, imagen 3 de 3
Disconnect the USB port cable
  • The ribbon cables and their connectors are extremely fragile, so always open locking tabs gently and pull cables slowly.

  • Use the flat end of a spudger to flip open the metal locking tab on the USB port ribbon cable.

  • During reassembly, gently snap the metal locking tab back into place once the cable has been inserted.

Die Flachbandkabel und die Anschlüsse sind extrem empfindlich, sei also beim Lösen und Entfernen sehr vorsichtig.

Löse die metallene Halteklammer des Flachbandkabels der USB-Anschlüsse mit dem flachen Ende eines Spudgers.

Lass die Halteklammer wieder sanft einschnappen, wenn du die Kabel wieder angeschlossen hast.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.