Saltar al contenido principal

iPhone 12 Pro Vervanging van de batterij

Inglés
Holandés

Información de Guía

= Hecho = Incompleto
    iPhone batteries are rated to hold 80% of their capacity for up to 500 charge cycles, which lasts roughly 18-24 months for most users. After that, your iPhone may need to be charged far more frequently, and iOS may warn you that performance is affected (in other words, your phone will run slower). Use this guide to replace your battery and restore your iPhone to like-new performance.
    If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
    '''***Note'''***: After the repairOn iOS 17.6 and earlier, your iPhone may display a warning about the “genuineness” of the battery after the repair, even when using original Apple parts. If your iPhone functions normally, you can safely ignore the warning. On iOS 18 and newer, authenticate your new battery using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
    For optimal performance, after completing this guide, [[Battery Calibration|calibrate]] your newly installed battery: Charge it to 100% and keep charging it for at least two more hours. Then use your iPhone until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow the above steps in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012%20Pro|iPhone 12 Pro Answers community] for help.

      Pasos de la guía

      Paso 1 — Localiseer de kleefstrips met treklip

      De batterij is in de achterste behuizing bevestigd door middel vier uitrekbare kleefstrips met treklip—twee aan de onderkant van de batterij en twee aan de bovenkant.

      Paso 2 — Verwijder de uitrekbare kleefstrips met treklip

      Peuter de eerste treklip omhoog en los van de onderkant van de batterij.

      Paso 3

      Trek de tweede kleefstrip van de onderkant van de batterij af.

      Paso 4

      Pak de eerste kleefstrips met je vingers vast en trek deze langzaam maar zeker onder de batterij weg, in de richting van de onderkant van de iPhone.

      Paso 5

      Pak de tweede kleefstrip met je vingers vast en trek ook deze onder de batterij vandaan, in de richting van de onderkant van de iPhone.

      Paso 6

      Trek de resterende twee treklipjes los van de bovenkant van de batterij.

      Paso 7

      Trek de resterende twee treklipjes, met dezelfde procedure als hiervoor, een voor een van de batterij af en verwijder de laatste kleefstrip. Probeer te voorkomen dat de strip afbreekt.

      Paso 8 — Het verwijderen van een vastzittende batterij

      Als je nog steeds moeite hebt met het verwijderen van de batterij kun je ervoor kiezen om wat druppels isopropyl alcohol (>90%) onder de kanten van de batterij, waar de kleefstrips zich bevinden, toe te dienen.

      Paso 9 — Verwijder de batterij

      Verwijder de batterij.

      Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.