Saltar al contenido principal

iPod Touch 7th Generation LCD Shield Plate Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Italiano
Paso 2
iPod Touch 7th Generation LCD Shield Plate Replacement: paso 0, imagen 1 de 1
  • Remove the following screws securing the LCD plate to the rear case:

  • Two 1.2 mm #000 Phillips screws

  • Nine 1.6 mm #000 Phillips screws

  • One 2.3 mm #000 Phillips screw

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.