Saltar al contenido principal

Colocación de fijaciones de esquí en un nuevo par de botas

Inglés
Español

Traduciendo paso 10

Paso 10
Fitting Ski Bindings to a New Pair of Boots: paso 0, imagen 1 de 3 Fitting Ski Bindings to a New Pair of Boots: paso 0, imagen 2 de 3 Fitting Ski Bindings to a New Pair of Boots: paso 0, imagen 3 de 3
  • Repeat step 9 but on the heel piece.

  • Adjust the DIN setting on the heel piece by tightening or loosening the screw on the back.

  • Look at the window on the top of the heel piece to see the current DIN setting.

  • Skiing with a DIN setting that is too high can be dangerous. Use caution to not over-tighten the screw.

Repite el paso 9 pero en la pieza del talón.

Ajusta la configuración DIN en la pieza del talón apretando o aflojando el tornillo en la parte posterior.

Mira la ventana en la parte superior de la pieza del talón para ver la configuración DIN actual.

Esquiar con un ajuste DIN demasiado alto puede ser peligroso. Ten cuidado de no apretar demasiado el tornillo.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.