Repara tus cosas Comunidad Tienda

Remplacement de la carte mère du Canon Powershot Pro1

Volver a la Guía
Inglés
Francés
Paso 2
Canon Powershot Pro1 Motherboard Replacement: paso 0, imagen 1 de 3 Canon Powershot Pro1 Motherboard Replacement: paso 0, imagen 2 de 3 Canon Powershot Pro1 Motherboard Replacement: paso 0, imagen 3 de 3

  • Using the Phillips #000 screwdriver:

  • Remove two 1.00 mm screws under the viewfinder.

  • Remove one screw in the battery compartment.

  • Remove five screws on the bottom of the camera.

  • Remove one screw on the left side of the camera (opposite the battery compartment).

À l'aide du tournevis cruciforme # 000: retirez les deux vis cruciformes # 0 de 1,00 mm sous le viseur, la vis dans le compartiment à piles et les cinq vis au bas de l'appareil photo et la vis unique sur le côté gauche de l'appareil photo ( face au compartiment des piles).

-[* red] Using the phillips #000 screwdriver: Remove the two 1.00 mm Phillips #0 screws under the viewfinder, the one screw in the battery compartment, and five screws on the bottom of the camera, and the single screw on the left side of the camera (opposite the battery compartment).
+[* black] Using the Phillips #000 screwdriver:
+ [* red] Remove two 1.00 mm screws under the viewfinder.
+ [* orange] Remove one screw in the battery compartment.
+ [* yellow] Remove five screws on the bottom of the camera.
+ [* black] Remove one screw on the left side of the camera (opposite the battery compartment).

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.