Repara tus cosas Comunidad Tienda

Nintendo Switch Pro Vervanging van de batterij van de controller

Inglés
Holandés

Información de Guía

= Hecho = Incompleto
    If your controller’s battery is not functioning properly, replace the battery using this guide. For this guide, you will need a Phillips #00 screwdriver. This replacement requires the removal of screws to access the battery.
    Welcome! Does the battery in your controller not last as long as it used to or not at all? You must be looking to replace the battery in your Nintendo Switch Pro Controller, well you have come to the right place! Below you will find instructions for replacing the battery in your controller, read them carefully and follow the steps in order from one to six.
    The Switch Pro Controller uses JIS screws. Be sure not to use a Phillips screwdriver to remove them, as it will potentially strip the screws.
    NOTE: an improperly sync Switch Pro controller will not charge properly. To determine if your battery is faulty and needs replacing, you can first re-sync your controller and, while plugged in, check within the Switch controllers menu if it is charging properly.
    CAUTION: The handling of any swollen batteries should be done with the utmost care. For information on how to identify, what to do with, how to handle, and how to dispose of swollen batteries follow the link below.
    [[What to do with a swollen battery]]
      To reassemble your device, follow these instructions in reverse order.
      For optimal performance, [[Battery Calibration|calibrate your newly installed battery|new_window=true]] after completing this guide.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Switch%20Pro%20Controller|Answers community] for help.

      Pasos de la guía

      Paso 1

      Draai de controller om zodat de stickers in de richting van het plafond wijzen.

      Paso 2

      Verwijder voorzichtig de covers van de handvatten door deze weg te trekken van de body.

      Paso 3

      Gebruik een Phillips #00 schroevendraaier om de vier zilveren 5 mm schroeven die de doorzichtige, plasticen cover bevestigen, te verwijderen.

      Paso 4

      Haal de doorzichtige, plasticen cover weg met je vingernagel.

      Paso 5

      Paso 6

      Verwijder de lithium-ion batterij door deze met behulp van je vingernagel of een plasticen openingstool aan de linkerkant omhoog te duwen. Je hebt hiervoor slechts een beetje kracht nodig.

      Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.