Saltar al contenido principal

PSP 2000のディスプレイの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 1

Paso 1
PSP 2000 Display Replacement: paso 0, imagen 1 de 3 PSP 2000 Display Replacement: paso 0, imagen 2 de 3 PSP 2000 Display Replacement: paso 0, imagen 3 de 3
  • Remove the home bar by gently prying on the left and right sides of it with the opening tools. Lift the bar out of the device.

  • A ribbon cable connects the home bar to the logic board. Be careful not to damage the cable when removing the bar.

ホームバーの左右を慎重に開口ツールでこじ開けます。デバイスからバーを持ち上げて取り出します。

リボンケーブルがホームバーとロジックボードの間に繋がれています。バーを取り出す際に、ケーブルにダメージを与えないようご注意ください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.