Saltar al contenido principal

PSP 2000 フロントケースの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 1

Paso 1
PSP 2000 Front Casing Replacement: paso 0, imagen 1 de 1
  • This step requires the removal of the warranty sticker. Removing the sticker will void the warranty. According to the FTC removing this will not void your warranty.

  • Locate the sticker in the battery compartment labeled: "En: Warranty Void if Seal Damaged."

  • Remove the sticker using the PSP Opening Tools.

  • Under the sticker is a 5mm Phillips screw needed in the next step.

この手順では剥がすと保証対象外となるボイドステッカーを剥がします。

バッテリーコンパートメントに貼られたステッカーの位置を確認します。

開口ピックを使って、ステッカーを剥がします。

ステッカーの下に取り付けられているのは、5mmプラスネジです。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.