Saltar al contenido principal

华为荣耀 8 电池更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Chino
Paso 2
Huawei Honor 8 Battery Replacement: paso 0, imagen 1 de 2 Huawei Honor 8 Battery Replacement: paso 0, imagen 2 de 2
  • Apply a heated iOpener to the screen for at least two minutes to loosen the adhesive beneath the battery.

  • The adhesive beneath the battery is very strong. You might need to repeat this process during the removal procedure several times. If heat does not work you can apply isopropyl alcohol (>90%) to the corners of the battery and let it penetrate the adhesive for several minutes before continuing.

  • The flex cables underneath the battery are laid out as shown in the image. Try to avoid prying close to the marked areas to prevent damaging the cables.

  • Display flex cable

  • Interconnect flex cable

将加热的 iOpener 施加到屏幕上至少两分钟,以松开电池下方的粘合剂。

电池下方的胶粘剂非常牢固。你可能需要在移除过程中多次重复此过程。如果不起作用,则可以在电池的四角涂异丙醇(> 90%),并使其渗透粘合剂几分钟,然后再继续操作。

如图所示,布置了电池下方的柔性电缆。尽量避免在标记区域附近撬动,以免损坏电缆。

显示屏排线

互连柔性电缆

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.