iPad Mini CDMA LCD Assembly Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 42 guías que incluyen este paso.

Inglés

Holandés

Traduciendo paso 10

Paso 10

In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.
Insert the flat end of a spudger between the LCD frame and the metal backing plate.
Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. Prying up on the plate will damage it, because it is screwed down to the rear case beneath the LCD.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.