Repara tus cosas Comunidad Tienda

iPhone XR屏幕的更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Paso 4
iPhone XR Display Assembly Replacement, Disconnect the digitizer: paso 0, imagen 1 de 2 iPhone XR Display Assembly Replacement, Disconnect the digitizer: paso 0, imagen 2 de 2
Disconnect the digitizer

  • Use the tip of a spudger to pry up and disconnect the digitizer cable.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

断开数字转换器

使用尖头撬棍 翘起触摸排线

要重新连接像这样的线缆连接头，请小心对齐并向下按压一侧，直到其卡入到位，然后在另一侧重复。 不要向下压中间。 如果连接器未对准，则插针会弯曲，从而造成永久性损坏。

如果维修后屏幕的任何部分对触摸均没有反应，请断开电池连接，然后重新安装此连接器，确保其完全卡入到位，并且插槽中没有灰尘或其他障碍物。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.