Saltar al contenido principal

iPhone XR Display Assembly 디스플레이 어셈블리 교체

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Coreano

Traduciendo paso 1

Paso 1
iPhone XR Display Assembly Replacement, Unscrew the battery connector cover: paso 0, imagen 1 de 2 iPhone XR Display Assembly Replacement, Unscrew the battery connector cover: paso 0, imagen 2 de 2
Unscrew the battery connector cover
  • Remove three 1.2 mm Y000 screws securing the battery connector cover bracket.

  • Remove the bracket.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the display in place. Be sure to power your iPhone back down completely before you continue working.

배터리 커넥터 브래킷을 고정하는 1.2mm Y000 나사 세 개를 빼주세요.

브래킷을 분리하세요.

iPhone 손상을 피하기 위하여 수리하는 내내 빼놓은 각각의 나사를 기억하여 원래 자리로 정확히 돌려놓으세요.

재조립 할 때는 디스플레이를 제자리에 봉하기전에 iPhone 전원을 켜고 모든 기능을 테스트하는 것이 좋습니다. 작업을 계속하기 전에 iPhone 전원을 완전히 끄는 것을 잊지마십시오.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.