Repara tus cosas Comunidad Tienda

微软Surface Go拆解

Volver a la Guía
Inglés
Chino
Paso 11
Microsoft Surface Go Teardown: paso 0, imagen 1 de 3 Microsoft Surface Go Teardown: paso 0, imagen 2 de 3 Microsoft Surface Go Teardown: paso 0, imagen 3 de 3

  • All that silicon, and yet this Go is fan-less and heatpipe-less. This thin copper shield and some thermal paste will have to do the heat sinking for this would-be PC. (Then again, you can always run it in a freezer...)

  • It's certainly a radical departure from those thick copper tentacles we found on the 5th-gen Pro, on the right. Hopefully it'll be enough for the Go's power-sipping, non-Turbo'd processor.

  • Now to pluck the final strings of this teardown. Such as: the Windows Hello camera, the 5 MP front-facing camera, and the 8 MP rear-facing camera (complete with piggybacked LED) all sitting in a row.

  • Finally, the modular microSDXC port with Realtek 5227S card reader controller—which is technically upgradable storage!

  • Not exactly the kind of upgradability we were hoping for, but we'll take what we can get.

所有的芯片，或者说这台Surface Go本身没有配备风扇或是热管，这种铜制薄屏蔽罩和一些导热膏为这台也许算是电脑的设备进行散热工作。（或许，你可以在冰箱里运行这台设备···）

和右侧我们在第五代Surface Pro上发现的铜制触手相比，Surface Go上的设计明显相当激进，希望对于Go上这颗不超频的CPU功耗来说已经足够使用了。

现在进行拆解的最后步骤，拆除支持Windows Hello的摄像头、前置5MP 摄像头和后置8MP 摄像头（背部带有LED指示灯），它们排列成一排。

最后，模块化的MicroSDXC读卡器和瑞昱（Realtek）5227S读卡器主控——这便是 理论上 可升级的存储空间。

虽然这并非我们所期望的可升级性，但至少我们还有得选择。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.