iPad 6 Wi-Fi Front Panel Assembly Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 11 guías que incluyen este paso.

Inglés

Holandés

Traduciendo paso 3

Paso 3

Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets.
To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.
During reassembly, make sure that these connectors are completely seated in their sockets, or you may encounter display issues.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.