Repara tus cosas Comunidad Tienda

Sostituzione cover posteriore Samsung Galaxy A3 (2017)

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Volver a la Guía
Inglés
Italiano
Paso 3
Samsung Galaxy A3 (2017) Back Cover Replacement: paso 0, imagen 1 de 3 Samsung Galaxy A3 (2017) Back Cover Replacement: paso 0, imagen 2 de 3 Samsung Galaxy A3 (2017) Back Cover Replacement: paso 0, imagen 3 de 3

  • Use an opening pick to cut the adhesive on all sides of the phone. Leave one opening pick in every corner to prevent the adhesive from resealing.

  • Reuse an iOpener if the adhesive becomes hard to cut. During the removal process the back cover is under tension all the time and is likely to break if the adhesive isn't loose enough.

  • Insert an opening pick on the right side of the phone after you cut the adhesive on all sides. Flip it sideways until you can get a good grip on the back cover.

Usa un plettro di apertura per tagliare l'adesivo su tutti i lati del telefono. Lascia un plettro in ogni angolo per impedire che l'adesivo si riattacchi.

Usa di nuovo un iOpener se l'adesivo diventa duro da tagliare. Nell'intero corso del processo di rimozione, la cover posteriore resta in tensione e quindi potrebbe rompersi se l'adesivo non si è indebolito a sufficienza.

Inserisci un plettro di apertura sul lato destro del telefono dopo aver tagliato l'adesivo lungo tutti i lati. Inclina l'attrezzo da una parte finché non riesci ad avere una buona presa sulla cover posteriore.

[* black] Use an opening pick to cut the adhesive on all sides of the phone. Leave one opening pick in every corner to prevent the adhesive from resealing.
[* icon_caution] [guide|25705|Reuse an iOpener|new_window=true] if the adhesive becomes hard to cut. During the removal process the back cover is under tension all the time and is likely to break if the adhesive isn't loose enough.
-[* black] Insert an opening pick on the right side of the phone after you cut the adhesive on all sides. Fip it sideways until you can get a good grip on the back cover.
+[* black] Insert an opening pick on the right side of the phone after you cut the adhesive on all sides. Flip it sideways until you can get a good grip on the back cover.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.