Saltar al contenido principal
Inglés
Español
Paso 3
Once the screws are all out from the exterior back case, Begin separating the front housing from the back by using a spudger or any similar tool.
  • Once the screws are all out from the exterior back case, Begin separating the front housing from the back by using a spudger or any similar tool.

  • Begin from the bottom were the battery bay is, It is the easiest way.

  • Be careful of ribbons behind the plastic

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.