Reemplazo de controles de volumen del iPhone 5

Qué necesitas

Paso 1 Controles de volumen

Reemplazo de controles de volumen del iPhone 5, Controles de volumen: paso 1, imagen 1 de 2

Reemplazo de controles de volumen del iPhone 5, Controles de volumen: paso 1, imagen 2 de 2

Remueve tres tornillos que sujetan el vibrador y el soporte de vibrador a la caja trasera:
Un tornillo Phillips de 2.3 mm
Un tornillo Phillips de 1.7 mm
Un tornillo Phillips 1.6 mm que sujeta el vibrador a la parte interna superior de la caja trasera.

Traducir

How do I remove the 1.6mm screw?

Alexei - 4 de dic. de 2019 Contestar

Paso 2

Remueve el vibrador y el soporte de vibrador de la caja trasera.

Traducir

Make sure you have removed all 3 screws connected to the vibrator since the bracket is welded on the motor house.

Johnny - 7 de ago. de 2013 Contestar

Paso 3

Remueve los siguientes tornillos que sujetan el botón de volumen y soportes de interruptor de timbre a un lado de la caja trasera:
Un tornillo Phillips de 1.5 mm
Dos tornillos Phillips d 1.8 mm

Traducir

The middle one 1,8 = 1,2 mm

Daniel Mone - 2 de may. de 2014 Contestar

yes, it is like you say

[Ados Production] - 18 de sep. de 2017

I can't remove the top screw for some reason, should it be any different from the rest?

arnaudjb - 4 de jun. de 2015 Contestar

When reassembled I noticed that when I firmly tightened these two screws tagged with orange circle , my ringer switch was stuck and didn't move. So I left these two screws little loose and ringer switch worked fine. Now I have used my phone couple weeks and there has been no problem with these loose screws.

Asko Pesola - 18 de mar. de 2016 Contestar

on my device the red circled screw is completely different. Under my magnifying glass the head is round. Don’t know how to unscrew. There is no fitting bit in my ifixit Pro Tech Toolkit. :(

Michael Kühnen - 4 de ene. de 2018 Contestar

When re-assembling these parts, make sure that the volume bracket is inserted UNDERNEATH the ringer switch bracket, or the + volume button will not make positive contact with the switch on the cable.

tinkertoy - 10 de mar. de 2023 Contestar

Paso 4

Usa la punta de un spudger para levantar el soporte del interruptor del timbre del lado de la caja trasera.
Remueve el interruptor del timbre.

Traducir

I didn't see mention of it, but I found the ringer switch button would slide down to OFF during reassembly, so I made sure the new ringer switch was also set to OFF before screwing all back together.

Dean M - 8 de ago. de 2014 Contestar

I found removing the hinge that secures the power button to require more force than I thought necessary. Seemed to be the most difficult part of the repair. When installing the new AC/PB cable, i started with this assembly and worked backwards. Would have been helpful to include a good set of tweezers in the repair kits for those with fat fingers like mine or who don't have a pair at home.

aroclobama - 10 de ene. de 2016 Contestar