Saltar al contenido principal

iPhone 5 Lightning Connector and Speaker Assembly Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. iPhone 5 Lightning Connector and Speaker Assembly Replacement, Lightning Connector and Speaker Assembly: paso 1, imagen 1 de 1
    • Remove the following screws securing the Lightning connector and speaker enclosure assembly to the rear case:

    • One 2.5 mm Phillips screw

    • Two 3.3 mm Phillips screws

    • One 2.9 mm Phillips screw

    • Two 1.5 mm Phillips screws

    • One 2.8 mm Phillips screw

  2. iPhone 5 Lightning Connector and Speaker Assembly Replacement: paso 2, imagen 1 de 3 iPhone 5 Lightning Connector and Speaker Assembly Replacement: paso 2, imagen 2 de 3 iPhone 5 Lightning Connector and Speaker Assembly Replacement: paso 2, imagen 3 de 3
    • Use the flat end of a spudger to gently pry the Lightning connector and speaker enclosure assembly cables up from the rear case.

    • Make sure you get the spudger under the large ribbon cable connected to the assembly. Prying the rest of the assembly away from the cable may result in a tear.

  3. iPhone 5 Lightning Connector and Speaker Assembly Replacement: paso 3, imagen 1 de 3 iPhone 5 Lightning Connector and Speaker Assembly Replacement: paso 3, imagen 2 de 3 iPhone 5 Lightning Connector and Speaker Assembly Replacement: paso 3, imagen 3 de 3
    • Remove the Lightning connector and speaker enclosure assembly from the rear case.

    • Take care not to lose the small metal washer on the speaker enclosure, or the four small metal washers beneath the Lightning connector screws.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,817 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,807