Saltar al contenido principal

Canon Powershot A3300 IS Back Cover Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Canon Powershot A3300 IS Back Cover Replacement: paso 0, imagen 1 de 3 Canon Powershot A3300 IS Back Cover Replacement: paso 0, imagen 2 de 3 Canon Powershot A3300 IS Back Cover Replacement: paso 0, imagen 3 de 3
  • Remove four 2.7 mm screws, two on each side, from the camera with a JIS 000 screwdriver.

  • Remove one 3.5 mm screw on the bottom of the camera with a JIS 000 screwdriver.

  • When removing the front and back housings, be careful to not break the tabs that hook into the top section of the chassis.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.