Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 8
Paso 8
-
With the J000 Philips head screwdriver, remove the two 2mm screws from under the flash.
-
Using the same screwdriver, remove the two 5mm screws from the bottom. One is under the battery door.
-
With the same screwdriver, remove the 2mm screw at the top of the metal plate.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.