Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 10
Paso 10
-
Using the J000 Philips head screwdriver, remove the four 7mm screws from the silver panel.
-
Remove the two 5mm screws.
-
Remove the one 3 mm screw.
-
Using the same screwdriver, remove the 3mm screw from the top of the camera.
-
Pull the panel off and set it aside.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.