Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
On some models, the front case is screwed down from the back. Follow steps 5 and 6 FIRST to remove the camera cover and two T6 screws, before removing the faceplate.
-
Use the Spudger to gently pry up the edges of the front face plate
-
At the center of the faceplate edge below the music keys there is a small latch on each side.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.