Saltar al contenido principal

Canon PowerShot SX520 HS Back Face Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Canon PowerShot SX520 HS Back Face Replacement: paso 0, imagen 1 de 3 Canon PowerShot SX520 HS Back Face Replacement: paso 0, imagen 2 de 3 Canon PowerShot SX520 HS Back Face Replacement: paso 0, imagen 3 de 3
  • Remove 2-3.4 mm screws that secure the back panel using a Phillips #000 screwdriver.

  • Remove 4-4 mm screws on the left and right sides of the camera using a Phillips #000 screwdriver.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.