Saltar al contenido principal

Disassembling Canon PowerShot SD1100 IS Front and Rear Cover

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Inglés
Español
Paso 2
Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: paso 0, imagen 1 de 3 Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: paso 0, imagen 2 de 3 Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: paso 0, imagen 3 de 3
  • Remove 2 screws from each side of the camera (4 total, 0.102 in).

  • Remove 2 screws from the bottom on the camera (0.138 in).

  • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.