Saltar al contenido principal

Introducción

Use this guide to remove the front and rear cover of the Canon PowerShot SD1100 IS.

Partes

No se especificaron partes.

  1. Remove wrist strap and battery. Remove wrist strap and battery.
    • Remove wrist strap and battery.

  2. Remove 2 screws from each side of the camera (4 total, 0.102 in). Remove 2 screws from the bottom on the camera (0.138 in). Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Gently pull off the front cover. The plate on the side should come off. Gently pull off the back cover.
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  5. The cases should now be removed.
    • The cases should now be removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Tyler Grossheim

Miembro Desde 25/01/11

1,359 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 3-32, Regan Winter 2011 Miembro de Cal Poly, Team 3-32, Regan Winter 2011

CPSU-REGAN-W11S3G32

3 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 3,158