Canon Powershot SD750 Motherboard Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés

Español

Traduciendo paso 9

Paso 9

Leave the camera facing backward so that the lens is facing up.
Pull the motherboard out by lifting it up on the left side about a 1/2 inch from the case and then slide it to the left.
Note: When reassembling, make sure the ZIF connectors are not covered by motherboard.
Caution: When removing the motherboard, pay special attention to the battery door detection switch or you may break the plastic nib.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.