Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 9
Paso 9
-
Rotate the camera upside down to locate the small black ZIF connector located in the middle of the camera.
-
Use the flat end of the spudger to flip up the tab on the black ZIF connector. Pull the ribbon cable straight out.
-
Remove the orange ribbon cable from the rest of the camera.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.