Saltar al contenido principal

Dell Inspiron 16 7610 Back Case Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Dell Inspiron 16 7610 Back Case Replacement: paso 0, imagen 1 de 2 Dell Inspiron 16 7610 Back Case Replacement: paso 0, imagen 2 de 2
  • Flip the device over, so the backside is facing up.

  • Use a Phillips #00 screwdriver to remove four 4.00 mm screws.

  • Use the Phillips #00 screwdriver to unscrew or loosen two captive screws at the right and left corner near the hinges.

  • The last two screws should remain in the back case and can't be removed.

  • Three of the screws are dummy screws, only screwed into retainers. They are not holding anything in and can be left in place for simplicity.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.