Saltar al contenido principal

Reemplazo del botón de encendido del iPad Pro 12.9" 4th Gen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Español
Paso 5
iPad Pro 12.9" 4th Gen Power Button Replacement, Remove the power button assembly: paso 0, imagen 1 de 3 iPad Pro 12.9" 4th Gen Power Button Replacement, Remove the power button assembly: paso 0, imagen 2 de 3 iPad Pro 12.9" 4th Gen Power Button Replacement, Remove the power button assembly: paso 0, imagen 3 de 3
Remove the power button assembly
  • Insert the point of your spudger between the left edge of the power button assembly and the frame.

  • Pry the assembly up from its recess in the frame.

  • Grab and remove the power button assembly.

  • Use a spudger to scrape and remove any residual epoxy before reinstalling the assembly.

Introduce la punta de tu spudger entre el borde izquierdo del ensamblaje del botón de encendido y el marco.

Haz palanca para levantar el ensamblaje de su hueco en el marco.

Agarra y retira el ensamblaje del botón de encendido.

Utiliza un spudger para raspar y eliminar los restos de epoxi antes de volver a instalar el ensamblaje.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.