Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 7
Paso 7
-
Remove two cables connected to the motherboard.
-
Use thin tweezers to push down on the clear piece and slide it out. At this point half of the clear piece should be free.
-
Remove one screw that is holding down the middle of the clear piece to the body of the camera. The whole structure with wires will swing out.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.