Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 10 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Grab the clear plastic pull tab attached to the battery connector and pull it toward the front edge of the Air to disconnect the battery from the logic board.
[* black] Grab the clear plastic pull tab attached to the battery connector and pull it toward the front edge of the Air to disconnect the battery from the logic board. | |
[* icon_caution] Do not lift upward on the connector as you disconnect it. | |
+ | [* icon_reminder] When reinstalling a new battery, it may be helpful to temporarily reconnect the battery before placing it in the frame. Make sure that the connector lays flat to the board. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.