Saltar al contenido principal

Reemplazo de cristal trasero de Samsung Galaxy S7

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Samsung Galaxy S7 Rear Glass Replacement: paso 0, imagen 1 de 1
  • Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.

  • Apply a heated iOpener to a long edge of the phone for about two minutes.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.

Abrir el dispositivo pondrá en riesgo su sellado impermeable. Ten preparado adhesivo de repuesto antes de proceder, o trata de evitar exposición a líquidos si vuelves a montar el dispositivo sin sustituir el adhesivo.

Calienta un iOpener y aplícalo a lo largo del borde del teléfono durante dos minutos.

Necesitarás volver a calentar y aplicar el iOpener varias veces para alcanzar la temperatura suficiente. Consulta las instrucciones del iOpener para evitar sobrecalentamiento del dispositivo.

También se puede utilizar un secador de pelo, pistola de calor, o lámina caliente, pero ten cuidado de no sobre calentar el móvil -la pantalla OLED y la batería interna son susceptibles a daño por calor.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.