Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Partes

No se especificaron partes.

  1. Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink. Pry the X clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.
    • Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.

    • Pry the X clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.

    • If necessary, insert your screwdriver parallel to the motherboard between the X clamp and its retaining post. Twist the screwdriver to fully release the X clamp from its retaining post.

    • Repeat this process for all four corners of the X clamp.

    • When removing the last corner of the X clamp and holding the motherboard upside down, be sure to catch the CPU heat sink to avoid damage from it falling.

    • Remove the CPU heat sink from the motherboard.

  2. Kits de Reparación de Pantalla LCD de iPhone

    La opción de presupuesto, cubierta por nuestra garantía de por vida.

    Compra kits

    Kits de Reparación de Pantalla LCD de iPhone

    Reduce los costos de reparación, no la calidad.

    Compra kits
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,164