Introducción
This guide will show how to replace the camera in the Vtech InnoTab Max.
Qué necesitas
-
-
-
Remove all screw caps from the back panel using a metal spudger.
Pregunta a FixBot
-
-
-
Now that all of the screws have been removed, pry the back cover off using a plastic opening tool.
-
-
-
-
Here you can see the back cover has been fully removed and you can now access the front cover.
-
To remove the front cover, remove the springs holding the pictured brackets in place, then pull it away.
-
-
-
-
-
The camera is not held down by anything, so simply remove it from it's spot to prepare for unplugging it.
-
-
-
Carefully remove the wire connecting the camera to the motherboard, using a tool to grip it if needed.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Equipo
USF Tampa, Team S5-G5, Lacy Spring 2017 Miembro de USF Tampa, Team S5-G5, Lacy Spring 2017
USFT-LACY-S17S5G5
Miembros de 3
10 Guías creadas
