Saltar al contenido principal
  1. Remove screws from down Remove screws from sides Gently take out the from of deck from metal base.
    • Remove screws from down

    • Remove screws from sides

    • Gently take out the from of deck from metal base.

  2. Remove left side black wire Remove white contact strips
    • Remove left side black wire

    • Remove white contact strips

    • Remove little screw to change ruble inside deck mechanims

    • Remove power supply grey wires

  3. Remove the small screw Then you can see the place of the weel. Change the ruble.
    • Remove the small screw

    • Then you can see the place of the weel. Change the ruble.

  4. Replace the big belt. Replace the small (green) belt.
    • Replace the big belt.

    • Replace the small (green) belt.

    • Use a little tape to old the belt. When closing remove the tape.

  5. Insert little screw and close the deck with new belts. Plug all the wires and strips.
    • Insert little screw and close the deck with new belts.

    • Plug all the wires and strips.

    • Close everything, and your done

    • Hope it help, please leave a comment.

Conclusión

To reassemble your device, follow these isntructions in reverse order

Un agradecimiento especial a estos traductores:

pt en

44%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Cafony

Miembro Desde 17/02/15

576 Reputación

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 32

Todo El Tiempo: 582