Repara tus cosas Comunidad Tienda

Removing the Jura IMPRESSA J5 brewing unit (brewgroup)

Introducción

These instructions tell you how to extract the brewing unit.

Qué necesitas

  1. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Jura Capresso IMPRESSA J5 opening procedure: paso 1, imagen 1 de 1

    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

    Traducir

  2. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 2, imagen 1 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 2, imagen 2 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 2, imagen 3 de 3

    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

    Traducir

  3. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 3, imagen 1 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 3, imagen 2 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 3, imagen 3 de 3
    Herramienta utilizada en este paso:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Comprar

    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

    Traducir

  4. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 4, imagen 1 de 1

    • Also remove the two oval head screws underneath the ground coffee compartment lid.

    Traducir

  5. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 5, imagen 1 de 1

    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

    Traducir

  7. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 6, imagen 1 de 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 6, imagen 2 de 2

    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

    Traducir

  8. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 7, imagen 1 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 7, imagen 2 de 3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 7, imagen 3 de 3

    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

    Traducir

  9. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 8, imagen 1 de 1

    • Remove the Torx T15 screw on the side panel with the water tank.

    Traducir

  10. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 9, imagen 1 de 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 9, imagen 2 de 2

    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

    Traducir

  11. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 10, imagen 1 de 1

    • Pull the left side panel slightly towards the back and remove it.

    Traducir

  12. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 11, imagen 1 de 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 11, imagen 2 de 2

    • The brewing unit is on the left side of the machine.

    Traducir

  13. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 12, imagen 1 de 2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 12, imagen 2 de 2

    • The cover over the brewing unit is only lightly gripped. Lift it out.

    Traducir

  14. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 13, imagen 1 de 1

    • In this image the brewing unit has been removed already to show you how it is connected.

    • Two Torx T15 machine screws

    • One Torx T15 screw

    • The hot water connection is plugged in.

    • The hose for the coffee spout is connected above.

    Traducir

  15. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 14, imagen 1 de 1

    • Unscrew the two Torx T15 machine screws.

    • Unscrew the lower Torx T15 screw near the hot water inlet pipe.

    • Pull off the coffee dispensing pipe.

    Traducir

  16. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): paso 15, imagen 1 de 1

    • First pull the brewing unit outward slightly at the base, lift it out with a downward motion.

    • If you want to disassemble the brewing unit for maintenance or cleaning, use these oder these instructions.

    Traducir
Conclusión

Work your way through the instructions in reverse to re-assemble the device.

Una persona más ha completado esta guía.

Un agradecimiento especial a estos traductores:

de en

100%

jana°

VauWeh

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Autor

con 1 otro colaborador

VauWeh

Miembro Desde 10/19/15

203,187 Reputación

246 Guías creadas

Insignias: 44

+ 41 más insignias

Equipo

Repair is War on Entropy Miembro de Repair is War on Entropy

Community

25 Miembros

1,120 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 17

Ultimos 30 días: 65

Todo El Tiempo: 4,689